Small Cooling Capacity Air Cooled Industrial Water Chiller Price /Water Cooling System

• Customization: Available
• After-sales Service: Video Technical Support, Online Support
• Warranty: 1 Year
• Model NO.: XC-LF5A
• Type: Air-Cooled
• Cooling Method: Air-cooled
• Selected Voltage: 380V/50HZ
• Compressor Number: 1
• Noise Level: Low
• Application Fields: Plastic
• Certification: ISO, CE
• Condition: New
• Rated Powder: 5HP
• Cooling Capacity: 12758kcal/H
• Working Temperature: 3~50 Degree
• Refrigerant Type: R22
• Evaporator: Shell and Tube
• Condenser: Finned Copper Tube+Low Noise Outer Rotor Fan
• Transport Package: Wooden Case as Usual
• Specification: 1280x680x1225 mm
• Trademark: XIECHENG
• Origin: China

Product Description

 

Small Cooling Capacity Air Cooled Industrial Water Chiller Price /Water Cooling System

Product Description

Air Cooled Water Chiller

The air cooled chiller, also known as an air-cooled box-type industrial chiller unit, utilizes a air-cooled heat dissipation design. It draws surrounding air into the equipment using built-in fans and dissipates heat through a condenser, thereby reducing the system temperature. It does not require an additional water cooling system and is relatively easy to install and maintain. 

Air cooled chiller is suitable for places with limited space or where sufficient cooling water cannot be provided. However, the cooling efficiency is affected by ambient temperature and humidity, so it is typically used in applications with lower heat loads. Each model is equipped with a range of safety features, including motor overload protection, phase loss and phase reversal alarms, anti-freeze thermostats, pressure gauges, and more. These chiller units demonstrate excellent performance and have a longer lifespan. Throughout the entire operating cycle, a series of steps based on the fundamental principles of heat exchange are followed. They are particularly suitable for industries that require precise control and regulation of chilled water temperature, allowing for precise control within the range of 3°C to 50°C, making them an important player in the modern industrial sector.

Working Principle

When the air cooled chiller starts, the refrigerant absorbs the heat from the cooled object in the evaporator and vaporizes. The compressor continuously extracts the generated gas from the evaporator and compresses it into high-temperature, high-pressure vapor. The refrigerant vapor is then sent to the condenser, where it undergoes heat exchange with the air. After releasing heat, it condenses into a liquid. The liquid refrigerant, after being depressurized by the expansion valve, enters the evaporator where it vaporizes again, absorbing heat from the cooled object. This heat exchange process is repeated until the industrial water is cooled to the desired temperature.

1	Compressor	9	Temp. sensor
2	Condenser	10	Water tank
3	Dry filter	11	Pump pressure gauge
4	Expansion valve	12	Pump
5	Evaporator	13	By-pass valve
6	Ball valve	14	Low pressure switch
7	Anti-freezing switch	15	High pressure switch
8	Level sensor	16	Blower

Application Scope in the Industry

Chillers are widely used in various industrial productions such as plastics, electronics manufacturing, electroplating, chemical engineering, ultrasonic cooling, and printing. They are employed in the cooling of molds for plastic processing machinery, significantly improving the surface smoothness of plastic products, reducing surface flaws and internal stress, preventing shrinkage and deformation, facilitating mold release, accelerating product shaping, and thus greatly enhancing the production efficiency and product quality of plastic molding machines.

Scroll Compressor

The entire range of Xiecheng air cooled chillers utilizes scroll compressors. The compressor serves as the heart of the entire refrigerant cycle system. The scroll compressor adopts a dual-flex design, ensuring tight sealing between the scroll discs. This design allows the scroll discs to separate radially and axially, allowing debris or liquid to pass through without damaging the compressor. This results in increased compressor lifespan, enhanced reliability, better liquid tolerance, and improved tolerance for impurities.

Shell and Tube Evaporator

The air cooled chiller utilizes a shell and tube evaporator. In this system, the refrigerant evaporates inside the heat exchange tubes, while water flows on the shell side. To enhance the heat exchange efficiency, a 2mm thick baffle plate is installed on the shell side, causing the water to flow back and forth to create ice brine. Additionally, to maintain a stable operating temperature, the exterior shell of the evaporator is covered with insulation material.

For the heat exchange tubes, we employ high-efficiency seamless copper tubes. These tubes undergo a grooving process to form internal thread fins, thereby increasing the heat exchange surface area with the refrigerant. With this technology, the heat transfer area is doubled, significantly improving the heat transfer efficiency.

Finned Type Condenser

By adopting a high-efficiency copper tube with aluminum finned type condenser, the air cooled chiller effectively dissipates heat. The finned structure increases the heat exchange surface area between the condenser and the surrounding environment, improving the heat dissipation efficiency. The excellent thermal conductivity of copper tubes, combined with the efficient heat dissipation characteristics of aluminum fins, ensures high efficiency during the cooling process.

Additionally, the application of light water aluminum and blue aluminum foils provides an additional protective layer. They help prevent corrosion of the copper tubes in corrosive environments, thereby extending the lifespan of the condenser and maintaining optimal refrigeration performance.

Product Specifications

Model			UNIT	XC-LF1A	XC-LF2A	XC-LF3A	XC-LF5A	XC-LF6A	XC-LF8A	XC-LF10A
Air Cooling Capacity			Kw	3.42	6.2	8.6	14.9	17.2	23	29.4
			Kcal/h	2941.2	5332	7396	12814	14792	19780	25284
Compressor	Input Power		Kw	0.75	1.5	2.2	3.75	4.5	6x1	3.75x2
	Rated Power		Hp	1	2	3	5	6	8x1	5×2
Power				1PH-220V/50HZ		3PH-380V/50HZ(200V/220V/415V  50Hz/60Hz)
Evaporator	Type		Water Tank with Coil				Shell and Tube
	Pie Diameter		lnch	1"	1"	1"	1"	1"	2"	2"
Refrigerant	Type		R22
	Quantity		Kg	1.6	1.8	2	2	2.5	4	5
Cooling water flow			M³/h	0.476	0.908	1.36	2.22	2.6	3.95	4.42
Air Cooled Condenser	Type		Finned Copper Tube + Low Noise Outer Rotor Fan
	Fan Power		W	90*1	170*1	180*1	180*2	180*2	420*2	420*2
Water Tank Capacity			Liter	20	25	40	45	45	80	80
Pump	Power		Kw	0.37	0.37	0.37	0.75	0.75	1.5	1.5
			hp	0.5	0.5	0.5	1	1	2	2
	Distance		m	15	15	15	25	25	15	15
	Fiow Rate		l/min	75	75	75	110	110	360	360
Safety Protection			High and Low Pressure Protection, Overload Protection,Overtemperature Protection, Phase Sequence Protection,etc.
Dimensions(L*W*H)		Air Cooled	mm	800*490 *865	800*565 *1025	960*630 *1025	1280*680 *1225	1280*680 *1225	1550*850 *1508	1550*850 *1508

Model			UNIT	XC-LF12A	XC-LF15A	XC-LF20A	XC-LF25A	XC-LF30A	XC-LF40A	XC-LF50A
Air Cooling Capacity			Kw	37	46.5	62	74.1	92.7	122.3	147.3
			Kcal/h	31820	39990	53320	63726	79722	105178	126678
Compressor	Input Power		Kw	4.5x2	3.75x3	7.5x2	9x2	7.5x3	7.5x4	9.4×4
	Rated Power		Hp	6×2	5×3	10×2	12.5x2	10x3	10×4	12.5×4
Power				3PH-380V/50HZ(200V/220V/415V  50Hz/60Hz)
Evaporator	Type		Water Tank with Coil	Shell and Tube
	Pie Diameter		lnch	2"	2.5"	2.5"	3"	3"	4"	4"
Refrigerant	Type		R22
	Quantity		Kg	5	7.5	11	11	12	18	18
Cooling water flow			M³/h	5.03	7.1	8.84	10.06	13.6	17.75	21.9
Air Cooled Condenser	Type		Finned Copper Tube + Low Noise Outer Rotor Fan
	Fan Power		W	420*2	800*2	420*3	800*3	800*3	420*6	800*6
Water Tank Capacity			Liter	80	100	150	210	210	380	400
Pump	Power		Kw	1.5	1.5	1.5	3	3	4	4
			hp	2	2	2	4	4	5.5	5.5
	Distance		m	15	16	16	16	16	16	18
	Fiow Rate		l/min	360	360	360	700	700	700	800
Safety Protection			High and Low Pressure Protection, Overload Protection,Overtemperature Protection, Phase Sequence Protection,etc.
Dimensions (L*W*H)		Air Cooled	mm	1550*850 *1508	1850*1000 *1600	2150*1000 *1780	2400*1000 *1800	2400*1150 *1930	2300*2000 *1800	2800*2100 *1960

 

Product Actual Shooting

 

Product Details

01 Microcomputer Controller

The air cooled chiller features an industry-leading LCD display microcomputer controller. This controller provides simultaneous display of the chiller's outlet temperature and the set temperature for precise temperature control. The user-friendly interface allows for easy operation and adjustment. With this controller, the water temperature can be precisely controlled within a range of 3°C to 50°C, ensuring optimal cooling performance.

02 Drying Filter System

The air cooled chiller is equipped with Emerson filters, which effectively remove impurities from the refrigerant and absorb free moisture in fluorocarbons. This system prevents the formation of ice blockages, particularly in narrow sections of pipelines (especially the valve ports of thermal expansion valves). It ensures the purity of the refrigerant and protects the compressor from potential damage.

03 Efficient Cooling System

The air-cooled chiller is equipped with a high-efficiency cooling system that includes low-noise external rotor fans. These fans are specifically designed to accelerate heat dissipation and enhance the overall cooling efficiency of the system. By improving airflow and maximizing heat transfer, this system ensures optimal cooling performance while operating with minimal noise levels.

04 High and Low Pressure Protection System

The high and low pressure protection system is designed to enhance the safety and efficiency of water pump operations. It involves the installation of high and low pressure gauges as well as a pump pressure gauge to continuously monitor the pressure of the water pump during operation.

05 Water Pumps

For chiller models ranging from 1 to 6HP, Orank stainless steel pump heads are used. For models with 8HP or higher, Taiwan Yuanli pipeline pumps are employed. These water pumps are known for their low noise operation, leak-free performance, and maintenance-free characteristics. They ensure reliable and efficient water circulation within the chiller system.

06 Electrical Self-control System

The electrical self-control system consists of power supply and automatic control components. It utilizes Siemens electronic components to ensure stable operation of the equipment. It incorporates a comprehensive range of safety protection devices, including current overload protection, high and low-pressure protection systems, and electronic time delay. These safety features provide robust protection and are complemented by an intuitive display system that alerts users to any abnormalities.

 

Application Range

The chiller is used in the plastic processing machinery mold cooling, electroplating industry,machinery industry, building industry, vacuum coating and food industry,etc.

About Us

 

Company ProfileIn 2009, founded by Mr. Fuzhibo with its head quarter in Jiangmen city which known as a famous hometown of many overseas Chinese, Jiangmen Xiecheng Machinery Co., Ltd. has been devoted herself to be an integrated enterprise of R&D, manufacturing and marketing businesses for High-end Industrial Refrigeration Equipment, Rubber and Plastic Moulding Auxiliary Automation Equipment, and also Intelligent Integrated System Solutions. Authenticated by IS09001, XIECHENG also successfully established the "6+1+C" full dimensional product service system with her own supply chain advantages of combining the six series of products, as Industrial Refrigeration, Mould Temp. Controlling, Material Conveying, Crushing & Recycling, Dehumidifying & Drying, and also Mixing, into central intelligent system solutions as Material Feeding, Air Supply, Water Supply and Power Supply, to fast fitting customers' specific demands.

 

 

Exhibition